North America
  • North America
  • Europe
  • United Kingdom
  • Asia & Pacific
  • Australia
  • South America
  • Africa

How to configure port sets in a Windows profile

Release Time
06/25/2020
Views
2260 times


Click ‘Configuration Templates’ > ‘Profiles’ > click the name of a Windows profile > 'Add Profile Section' > 'Firewall' > 'Portsets'

  • A port set is a collection of one or more ports that you can reference in a firewall rule.

  • For example, you could create a group called ‘Outgoing Mail Ports’, which consists of port numbers 25, 465, 587, 2525 and 4065. You can then control traffic to all 5 ports by simply selecting the ‘Mail Ports’ group in a firewall rule.

  • Portsets can be made up of individual port numbers or port ranges.

  • This article explains how to configure a custom portset in Endpoint Manager.

Manage portsets

  • Login to Xcitium

  • Click 'Applications' > 'Endpoint Manager'

  • Click ‘Configuration Templates’ > ‘Profiles’

  • Open the Windows profile applied to your target devices

    • Open the 'Firewall' tab if it has already been added to the profile

      OR

    • Click 'Add Profile Section' > 'Firewall' if it hasn't yet been added:

  • Click the 'Portsets' tab:


     

  • Endpoint Manager ships with three default portsets:

    • HTTP Ports: 80, 443 and 8080. These are the ports typically used for http traffic. Internet browsers uses these ports to connect to the internet.

    • POP3/SMTP Ports: 110, 25, 143, 995, 465 and 587. These ports are typically used to send/receive email. For example, by mail clients like Outlook and Thunderbird.

    • Privileged Ports: 0-1023. Privileged ports are so called because it is usually desirable to prevent users from running services on these ports. Network admins usually reserve or prohibit the use of these ports.

  • Click 'Add' to create a custom portset


     

    • Name - Enter a label for the custom portset. Once saved, the portset name will become available for selection in the firewall rule interfaces.

  • Click 'Add' to specify the ports you want to include in the set:


 

  • Select your ports then click ‘OK’. Repeat the process to add more ports to the set.
     
    • Any - Include all port numbers (1 - 65535)
       
    • A single port – Enter the required port number in the box
       
    • A port range - Enter the start and end port numbers in the respective boxes
       
    • Exclude (i.e. NOT the choice below): Removes the port numbers you select from the port set.

      You can use this to create exceptions within a port set. For example, say you wanted the set to address ports 1 – 200, but not port 50. First, click ‘Add’, specify a port-range of 1 – 200, then click ‘OK’. Next, click ‘Add’ again, enable ‘Exclude, specify port 50 , click ‘OK’. Your set would look like this:

  • Click 'OK' in the 'Port' dialog. The ports will be added to the new portset in the 'Portset' interface.

  • Click 'OK' in the 'Portset' dialog to add the set to the profile.

The portsets will be available for selection when you choose 'A set of ports' as source / destination port while creating or editing a firewall rule, to impose access restriction to the ports, on the devices applied with this profile.

Further Reading:

How to configure general firewall settings in a Windows profile

How to configure internet access rights for applications via Endpoint Manager

How to add global rules to firewall in a Windows profile

How to create a custom firewall rule set in a Windows profile

How to configure network zones in a Windows profile